The speed value is too low, and will bring up too many results - Try raising this value and bring the date range tighter so that there is not as many results.
Also enable signposted speed alerts if you have SmartNav installed on the iFace
speed event report can only report speed events, if speed events are being logged by the devices in the vehicle.
Speed events fall into two categotries:
(1) A defined Speed event limit on company or fleet by fleet level or
(2) As a result of SmartNav turn by turn driver Navigation with activated road posted speed sign monitoring, where the speed event is any speed in excess of the road posted speed sign.
So, determine the company and/or fleet level speed events you want the system to record and get customer support to set this up for you. Once that is done, and from that time onwards, all events over that threshold will be stored. As a result you can then run a report listing all value over that threshold.
So for example, if your company threshold was 80km/hr, all events over 80km/hr would be logged, however YOU may only want all speed event that are over 100km/hr; in that case in your report paramaters your would specify a speed of > 100km/hr.
If you have activated road posted speed signs then all "over speed" events from any posted speed sign will be recorded as events.
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | ||
|---|---|---|
| ||
|