Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »


Syncing the vehicle odometer allows you to modify how NextGen gets its odometer readings from.

This can be helpful if the CAN Bus readings differ to the odometer on the dashboard of the vehicle. 


Using the maintenance module you are able to choose from 3 features to report on.

  • Actual CAN-Bus
  • Elapsed CAN-Bus
  • Elapsed GPS/Ignition


The process is outlined below to sync the values when using Elapsed CAN-Bus or Elapsed GPS/Ignition

  1. Go to the vehicle in NextGen and edit (Admin>vehicles>edit)
  2. Go to the vehicle Odometer/Engine Hours tab



3. Select "Elapsed Can-bus" or "Elapsed GPS/Ignition", and add in the date of the synchronisation, using today as an example (23/05/2016)

4. Select the closest ignition off to when the odometer was recorded, along with the updated odometer info.



5. Update the vehicle


  • No labels